Honda Marine



*Value does not include freight, pdi and applicable taxes.

Featured accessories


Big on convenience, versatility and performance, Honda portable outboard motors are easy to use and easy to transport.

Outboard Cover

This cover helps protect your Honda outboard against dust and debris while not in use. Honda Marine logo inprinted. Available for models BF2 through BF225.

See your local Honda dealer for pricing.

O.E. Original Aluminum - 3 Blades

Genuine Honda 3-blade propeller. Available for models BF2 through BF50.

See your local Honda dealer for pricing.

Type 4-Stroke, OHV; 1 Cylinder / 2 Valves
Displacement 127 cc / 7.8 cubic in.
Bore & Stroke 60 mm x 45 mm (2.36 x 1.77 in.)
Full Throttle RPM Range 4,000-5,000 RPM
Propshaft Rated Horsepower (HP) 5 hp @ 5,000 RPM
Cooling System Water Cooled
Fuel Delivery 1 Carburetor
Recommended Fuel Unleaded Gas. (Min. Pump Octane 86)
Ignition System Digital CDI
Starting System Recoil
Exhaust Under Water, above propeller
Lubrication Forced Lubrication (Trochoid pump)
Recommended Oil SAE 10W30 API service classification SJ or later
Oil Capacity 0.55 L (0.48 Imp. qt)
Trim Range 5-Stage 5°-9°-13°-17°- 21°
Tilt Range 3-Stage 30°- 45°- 70°
Steering Angle N/A
Gear Ratio 2.08:1
Gear Shift F-N-R
Alternator (Manual Start) 3 amp / 38 watts Optional
Alternator (Electric Start) N/A
Battery Charging Power N/A
Power Tilt N/A
Power Trim & Tilt N/A
Gas Assisted Tilt N/A
Oil Pressure Alert Standard
Over Rev-Limiter Standard
Temperature Alert N/A
Water in Fuel Alert N/A
Battery Condition Alert N/A
Speedometer Pickup N/A
Variable Speed Trolling Kit N/A
Rudder Meter Kit N/A
Tilt limit Kit N/A
Overall Width 350 mm / 13.8 in.
Transom Height (S-Type) 445 mm / 17.5 in.
Transom Height (SCHC-Type) N/A
Transom Height (L-Type) 572 mm / 22.5 in.
Transom Height (LCHC-Type) N/A
Transom Height (X-Type) N/A
Transom Height (XX-Type) N/A
Propeller Type 3-Blade (Aluminum)
Propeller Diameter x Pitch (S-Type) 200 mm x 190 mm / 7-7/8 x 7-1/2 in.
Propeller Diameter x Pitch (L-Type) 200 mm x 190 mm / 7-7/8 x 7-1/2 in.
Propeller Diameter x Pitch (BF(P) Models) N/A
S-Type 27 kg / 60 lbs.
SHS-Type N/A
SRC-Type N/A
L-Type 27.5 kg / 61 lbs.
X-Type N/A
XC-Type N/A
XX Type N/A

*Optional built-in Pitot tube kit required.

**The steering angle can be set at 30° when two outboard motors are installed at an interval of 558 mm (ICOMIA standard recommendation). It can be set at 50°, too, depending on the installation interval.
Do not set the steering angle at 50° on a high speed boat, as it can impair the steering stability.
When the boat is equipped with a hydraulic steering type of the outboard motor, steering angle can be set at 30°.
It cannot be set at 50°. However, note that the steering angle can be set at 50° by using a connecting plate, depending on the type of hydraulic steering.

Honda outboard motors are power rated in accordance with NMMA procedures using the ICOMIA standard 28/23.


Standard Warranty

As a testament to their quality and reliability, all Honda marine engines come with a warranty of 36 months for non-commercial use and 12 months for commercial use. For more information on warranty, please view your distributor's warranty info sheet or visit our Warranty section.

Honda Plus Extended Warranty

Honda Plus extended warranty is now available for your marine engine. You can prolong your worry-free pleasure on specified parts and components even further. For more details, please view the Warranty section.

Compare Models
Parts And Service
Find A Dealer
Special Offers