BF150

LARGE

Selling Price* $20,484
*Price does not include rigging, installation, and applicable taxes.

Featured accessories

LARGE

For epic days on the water with big power, exceptional performance and leading technology.

Type 4-Stroke DOHC, VTEC; 4 Cylinder / 16 Valves
Displacement 2, 354 cc / 144 cubic in.
Bore & Stroke 87 x 99 mm (3.43 x 3.89 in.)
Full Throttle RPM Range 5,000-6,000 RPM
Propshaft Rated Horsepower (HP) 150 hp @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Electronic Fuel Injection (PGM-FI)
Recommended Fuel Unleaded Gas. (Min. Pump Octane 86)
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Prop Hub
Lubrication Wet Sump
Recommended Oil Honda 10W30 FC-W™ outboard motor oil
Oil Capacity 6.70 L (5.90 Imp. qt) with oil filter repl.
Trim Range -4° to +16°
Tilt Range 72°
Steering Angle 30°
Gear Ratio 2.14:1
Gear Shift F-N-R
Alternator (Manual Start) N/A
Alternator (Electric Start) 51 amp
Battery Charging Power 30 amp @1,000 RPM; 40 amp @2,000+ RPM
Power Tilt N/A
Power Trim & Tilt Standard
Gas Assisted Tilt N/A
Oil Pressure Alert Standard
Over Rev-Limiter Standard
Temperature Alert Standard
Water in Fuel Alert Standard
Battery Condition Alert Standard
Speedometer Pickup Standard
Variable Speed Trolling Kit Optional
Rudder Meter Kit N/A
Tilt limiter switch Standard
Overall Width 610 mm/24 in.
Transom Height (S-Type) N/A
Transom Height (SCHC-Type) N/A
Transom Height (L-Type) 508 mm / 20 in.
Transom Height (LCHC-Type) N/A
Transom Height (X-Type) 635 mm / 25 in.
Transom Height (XX-Type) N/A
Propeller Type Optional
Propeller Diameter x Pitch (S-Type) N/A
Propeller Diameter x Pitch (L-Type) N/A
Propeller Diameter x Pitch (BF(P) Models) N/A
S-Type N/A
SCHC-Type N/A
SHGC-Type N/A
SHS-Type N/A
SRC-Type N/A
L-Type 217 kg / 478 lbs (With propeller mounted)
LCHC-Type N/A
LHGC-Type N/A
LRTC-Type N/A
X-Type 221 kg/487 lb. (mech); 224 kg/493 lb. (iST)
XC-Type 224 kg/494 lb. (mech); 227 kg/500lb. (iST)
XRTC Type N/A
XX Type N/A

*Optional built-in Pitot tube kit required.

**The steering angle can be set at 30° when two outboard motors are installed at an interval of 558 mm (ICOMIA standard recommendation). It can be set at 50°, too, depending on the installation interval.
Do not set the steering angle at 50° on a high speed boat, as it can impair the steering stability.
When the boat is equipped with a hydraulic steering type of the outboard motor, steering angle can be set at 30°.
It cannot be set at 50°. However, note that the steering angle can be set at 50° by using a connecting plate, depending on the type of hydraulic steering.

Honda outboard motors are power rated in accordance with NMMA procedures using the ICOMIA standard 28/23.

Warranty

Standard Warranty

As a testament to their quality and reliability, all Honda marine engines come with a warranty of 36 months for non-commercial use and 12 months for commercial use. For more information on warranty, please view your distributor's warranty info sheet or visit our Warranty section.

Honda Plus Extended Warranty

Honda Plus extended warranty is now available for your marine engine. You can prolong your worry-free pleasure on specified parts and components even further. For more details, please view the Warranty section.

Compare Models
Accessories
Parts And Service
Find A Dealer
Finance
Special Offers