*Value does not include freight, pdi and applicable taxes.

Featured accessories


Get the versatility of a lightweight engine along with the big performance of a powerful outboard.

Type 4-Stroke SOHC; 3 Cylinders / 6 Valves
Displacement 808 cc / 49.4 cubic in.
Bore & Stroke 70 mm x 70 mm (2.76 x 2.76 in.)
Full Throttle RPM Range 5,500-6,000 RPM
Propshaft Rated Horsepower (HP) 50 hp @ 5,750 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Electronic Fuel Injection (PGM-FI)
Recommended Fuel Unleaded Gas. (Min. Pump Octane 86)
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Prop Hub
Lubrication Pressure Lubrication (Trochoid pump)
Recommended Oil SAE 5W30 API service classification SJ or later
Oil Capacity 2.10 L (1.85 Imp. qt) with oil filter repl.
Trim Range -4° to +12°
Tilt Range 63°
Steering Angle 35°
Gear Ratio 2.08:1
Gear Shift F-N-R
Alternator (Manual Start) N/A
Alternator (Electric Start) 22 amp / 275 watts
Battery Charging Power 17 amp
Power Tilt N/A
Power Trim & Tilt LHTC & LRTC models
Gas Assisted Tilt N/A
Oil Pressure Alert Standard
Over Rev-Limiter Standard
Temperature Alert Standard
Water in Fuel Alert N/A
Battery Condition Alert Standard
Speedometer Pickup Standard
Variable Speed Trolling Kit Optional
Rudder Meter Kit N/A
Tilt limit Kit N/A
Overall Width 372 mm / 14.6 in.
Transom Height (S-Type) N/A
Transom Height (SCHC-Type) N/A
Transom Height (L-Type) 556 mm / 21.9 in.
Transom Height (LCHC-Type) N/A
Transom Height (X-Type) N/A
Transom Height (XX-Type) N/A
Propeller Type 3-blade (Aluminum)
Propeller Diameter x Pitch (S-Type) N/A
Propeller Diameter x Pitch (L-Type) 11-1/4 x 13 in.
Propeller Diameter x Pitch (BF(P) Models) N/A
S-Type N/A
SHS-Type N/A
SRC-Type N/A
L-Type N/A
LRTC-Type 98 kg / 216.1 lbs.
X-Type N/A
XC-Type N/A
XX Type N/A

*Optional built-in Pitot tube kit required.

**The steering angle can be set at 30° when two outboard motors are installed at an interval of 558 mm (ICOMIA standard recommendation). It can be set at 50°, too, depending on the installation interval.
Do not set the steering angle at 50° on a high speed boat, as it can impair the steering stability.
When the boat is equipped with a hydraulic steering type of the outboard motor, steering angle can be set at 30°.
It cannot be set at 50°. However, note that the steering angle can be set at 50° by using a connecting plate, depending on the type of hydraulic steering.

Honda outboard motors are power rated in accordance with NMMA procedures using the ICOMIA standard 28/23.


Standard Warranty

As a testament to their quality and reliability, all Honda marine engines come with a warranty of 36 months for non-commercial use and 12 months for commercial use. For more information on warranty, please view your distributor's warranty info sheet or visit our Warranty section.

Honda Plus Extended Warranty

Honda Plus extended warranty is now available for your marine engine. You can prolong your worry-free pleasure on specified parts and components even further. For more details, please view the Warranty section.

Compare Models
Parts And Service
Find A Dealer
Special Offers