BF75

MID-RANGE

Manufacturer
Discounted Price*
$9,955
Discount $844
MSRP STARTING FROM* $10,799
*Value does not include freight, pdi and applicable taxes.

Featured accessories

MID-RANGE

Get the versatility of a lightweight engine along with the big performance of a powerful outboard.

Outboard Cover

This cover helps protect your Honda outboard against dust and debris while not in use. Honda Marine logo inprinted. Available for models BF2 through BF225.


See your local Honda dealer for pricing.

Solas High Rake Titan - 4 Blades

In addition to its high rake and large cup design, this stainless steel 4-blade design can deliver not only a very powerful thrust, but also a smooth operation characteristic. This propeller series offers excellent cruising performance. Available for models BF75 through BF225.


See your local Honda dealer for pricing.

Type 4-Stroke SOHC; 4 Cylinder / 16 Valves
Displacement 1,496 cc / 91.4 cubic in.
Bore & Stroke 73 mm x 89.4 mm (2.87 x 3.52 in.)
Full Throttle RPM Range 5,000-6,000 RPM
Propshaft Rated Horsepower (hp) 75 hp @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Electronic Fuel Injection (PGM-FI)
Recommended Fuel Unleaded Gas. (Min. Pump Octane 86)
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Prop Hub
Lubrication Wet Sump
Recommended Oil SAE 10W30 API service classification SJ or later
Oil Capacity 4.40 L (3.90 Imp. qt) with oil filter repl.
Trim Range -4° to +16°
Tilt Range 68°
Steering Angle 30°
Gear Ratio 2.33:1
Gear Shift F-N-R
Alternator (Manual Start) N/A
Alternator (Electric Start) 44 amp
Battery Charging Power 35 amp
Power Tilt N/A
Power Trim & Tilt Standard
Gas Assisted Tilt N/A
Oil Pressure Alert Standard
Over Rev-Limiter Standard
Temperature Alert Standard
Water in Fuel Alert Standard
Battery Condition Alert Standard
Speedometer Pickup Standard*
Variable Speed Trolling Kit Optional
Rudder Meter Kit N/A
Tilt limit Kit N/A
Overall Width 449 mm / 17.7 in.
Transom Height (S-Type) N/A
Transom Height (SCHC-Type) N/A
Transom Height (L-Type) 508 mm / 20 in.
Transom Height (LCHC-Type) N/A
Transom Height (X-Type) N/A
Transom Height (XX-Type) N/A
Propeller Type Optional
Propeller Diameter x Pitch (S-Type) N/A
Propeller Diameter x Pitch (L-Type) N/A
Propeller Diameter x Pitch (BF(P) Models) N/A
S-Type N/A
SCHC-Type N/A
SHGC-Type N/A
SHS-Type N/A
SRC-Type N/A
L-Type N/A
LCHC-Type N/A
LHGC-Type N/A
LRTC-Type 162 kg / 357 lbs.
X-Type N/A
XC-Type N/A
XRTC-Type N/A
XX-Type N/A

*Optional built-in Pitot tube kit required.

**The steering angle can be set at 30° when two outboard motors are installed at an interval of 558 mm (ICOMIA standard recommendation). It can be set at 50°, too, depending on the installation interval.
Do not set the steering angle at 50° on a high speed boat, as it can impair the steering stability.
When the boat is equipped with a hydraulic steering type of the outboard motor, steering angle can be set at 30°.
It cannot be set at 50°. However, note that the steering angle can be set at 50° by using a connecting plate, depending on the type of hydraulic steering.

Honda outboard motors are power rated in accordance with NMMA procedures using the ICOMIA standard 28/23.

Warranty

Standard Warranty

As a testament to their quality and reliability, all Honda marine engines come with a warranty of 36 months for non-commercial use and 12 months for commercial use. For more information on warranty, please view your distributor's warranty info sheet or visit our Warranty section.

Honda Plus Extended Warranty

Honda Plus extended warranty is now available for your marine engine. You can prolong your worry-free pleasure on specified parts and components even further. For more details, please view the Warranty section.

Compare Models
Accessories
Parts And Service
Find A Dealer
Finance
Special Offers