Selling Price* $4,457
*Price does not include rigging, installation, and applicable taxes.

Featured accessories


Big on convenience, versatility and performance, Honda portable outboard motors are easy to use and easy to transport.

Type 4-Stroke SOHC; 2 Cylinders / 4 Valves
Displacement 350 cc / 21.4 cubic in.
Bore & Stroke 59 mm x 64 mm (2.32 x 2.52 in.)
Full Throttle RPM Range 5,000-6,000 RPM
Propshaft Rated Horsepower (HP) 20 hp @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery 1 Carburetor
Recommended Fuel Unleaded Gas. (Min. Pump Octane 86)
Ignition System PGM-IG
Starting System Recoil (Electric / Recoil)
Exhaust Under Water, above propeller
Lubrication Forced Lubrication (Trochoid pump)
Recommended Oil SAE 10W30 API service classification SJ or later
Oil Capacity 1.30 L (1.14 Imp. qt) with oil filter repl.
Trim Range 4-Stage 8°-12°-16°-20°
Tilt Range 71° (S-type); 72° (L-Type)
Steering Angle N/A
Gear Ratio 2.08:1
Gear Shift F-N-R
Alternator (Manual Start) 6 amp / 76 watts
Alternator (Electric Start) 12 amp / 152 watts
Battery Charging Power N/A
Power Tilt LRTC model only
Power Trim & Tilt N/A
Gas Assisted Tilt LHGC model only
Oil Pressure Alert Standard
Over Rev-Limiter Standard
Temperature Alert Standard
Water in Fuel Alert N/A
Battery Condition Alert N/A
Speedometer Pickup N/A
Variable Speed Trolling Kit N/A
Rudder Meter Kit N/A
Tilt limit Kit N/A
Overall Width 350 mm / 13.7 in.
Transom Height (S-Type) 432 mm / 17 in.
Transom Height (SCHC-Type) N/A
Transom Height (L-Type) 563 mm/ 22.2 in.
Transom Height (LCHC-Type) N/A
Transom Height (X-Type) N/A
Transom Height (XX-Type) N/A
Propeller Type 4-Blade (Aluminum)
Propeller Diameter x Pitch (S-Type) 235 mm x 254 mm / 9-1/4 x 10 in.
Propeller Diameter x Pitch (L-Type) 235 mm x 254 mm / 9-1/4 x 10 in.
Propeller Diameter x Pitch (BF(P) Models) N/A
S-Type 46.5 kg / 103 lbs.
SHS-Type N/A
SRC-Type 50.5 kg / 111 lbs.
L-Type 49.5 kg / 109 lbs.
LHGC-Type 58.5 kg / 129 lbs.
LRTC-Type 50.0 kg / 110 lbs.
X-Type N/A
XC-Type N/A
XX Type N/A

*Optional built-in Pitot tube kit required.

**The steering angle can be set at 30° when two outboard motors are installed at an interval of 558 mm (ICOMIA standard recommendation). It can be set at 50°, too, depending on the installation interval.
Do not set the steering angle at 50° on a high speed boat, as it can impair the steering stability.
When the boat is equipped with a hydraulic steering type of the outboard motor, steering angle can be set at 30°.
It cannot be set at 50°. However, note that the steering angle can be set at 50° by using a connecting plate, depending on the type of hydraulic steering.

Honda outboard motors are power rated in accordance with NMMA procedures using the ICOMIA standard 28/23.


Standard Warranty

As a testament to their quality and reliability, all Honda marine engines come with a warranty of 36 months for non-commercial use and 12 months for commercial use. For more information on warranty, please view your distributor's warranty info sheet or visit our Warranty section.

Honda Plus Extended Warranty

Honda Plus extended warranty is now available for your marine engine. You can prolong your worry-free pleasure on specified parts and components even further. For more details, please view the Warranty section.

Compare Models
Parts And Service
Find A Dealer
Special Offers